PIN Striping Racing | GT blue

Product information "PIN Striping Racing"

Give your bike a fresh, sporty touch with the PIN Striping Racing. The rim strips are easy to apply and fit absolutely perfect for the curve of the 17 inch rim.

self-adhesive
fadeless and UV-resistant
weather-proof and carwash-proof
no removal of the rim required
removable without residue
width: 7 mm
Package contents: 14 equally sized circle segments  (3 strips per each side of the rim,  plus 1 reserve strip for each side  of the motorcycle), spacer 17''  for application

Application

Preparation: The wheels must be dry, clean and free of grease or wax. For degreasing we recommend FOLIATEC.com cleaning wipes. The ideal application temperature is 20 degrees Celsius.
Application: Remove the carrier paper. Apply 3 single strips per rim side in the correct distance. To do this, use the included spacer pattern. After applying press the strips firmly on. Then remove the transfer sheet carefully. For a nice finish press the strips on again with a soft cloth.
Removal: Warm the strips with a hair dryer. Lift the strips at one corner and pull it off slowly.

Note: The FOLIATEC.com PIN Striping Racing achieve their full adhesive strength after 12 hours. Adhesion may be reduced due to rough, matt or coated surfaces.