CARWRAPPING Film Ultra Carbon

Application

The same procedure works for all 3D-malleable CARWRAPPING Films. With a hot-air gun, a knife and a squeege true miracles can be done.

For further instructions read the application sheet!

Frequently asked

How much CARWRAPPING Film do I need for my car?

⇒ The CARWRAPPING Film is 1.52m wide. The consumption on the front lid is approximately 2 running meters, on the roof it’s about 3 running meters. A whole compact class car needs about 15 running meters.

How do I prepare the surface?

⇒ The car has to be cleaned with isopropanol (cleaning alcohol) and should be free of any dust or dirt particles.

Can the CARWRAPPING Film be applied wet?

⇒ It is possible to apply the CARWRAPPING Film wet, the film achieves it full gripping after full it has dried out completely. Therefore the car should stand in a garage with at least 15°C.

Are CARWRAPPING Films applicable in 3D?

⇒ Yes, after warming with a heat gun, the CARWRAPPING Film is 3D applicable.

How Do I maintain the CARWRAPPING Film?

⇒ Wrapped vehicles can be cleaned in a car wash or by hand.

Do you have any questions? You can reach us via our contact form, via WhatsApp +49 (0)152/591515 or via e-mail: support(at)foliatec.de