FOLIATEC DIY Spray System
FOLIATEC DIY Spray System especially for the usage of the FOLIATEC.com Carbody Spray Film
Prices incl. VAT plus shipping costs
Ready to ship today,
Delivery time appr. 1-3 workdays
- Order number: 9101
- Kostenloser Versand ab € 50,- Bestellwert
- Versand innerhalb von 24h*
- 30 Tage Geld-Zurück-Garantie
FOLIATEC.com Spray System: the revolutionary coating system for vehicles!
Our new developed FOLIATEC.com Carbody Spray Film transforms your car optically simply in the twinkle of an eye. The high-quality FOLIATEC Spray System powered by WAGNER, a global leading producer of devices for surface coating, was developed especially for the usage of the FOLIATEC.com Carbody Spray Film – so you can get started easily.
- FOLIATEC Spray System with paint gun, compressor and special 12 m air hose
- easy application: fill in paint, insert the plug and ready to go
- adjustable spray jet
- All car parts that can be easily removed should be dismantled. Mask all surfaces that are not to be coated. Mask rubber seals with FOLIATEC.com Easy Up Tape (item no. 79920). You should also protect wheel housings and the car underbody from spray mist.
- Clean and dry the surface to be sprayed, including edges, then degrease using FOLIATEC.com Carbody Spray Film Pre-cleaner (item no. 79934). After cleaning, remove the remaining dust with a duster (item no. 79933).
- Application with FOLIATEC.com spray system: Apply the FOLIATEC.com Carbody Spray Film in 4 to 5 generous layers. On horizontal surfaces (roof or bonnet), work at a slow pace and at level 1 or 2; set the quantity control on the spray pistol grip to level IIII. On vertical surfaces, work at a medium pace and level 2. If necessary, reduce the quantity control on the spray pistol grip. Only use in suitable workshops and garages. Reduce ventilation if working in a spray booth.
- Application with spray gun: Apply the FOLIATEC.com Carbody Spray Film in 4 generous layers at medium speed. Use a 2 - 2.5 mm spray nozzle with approx. 2 bar pressure on the spray gun in a suitable spray booth.
- Flash off for 45 - 60 minutes after every spray coating until the wet surface is visibly matt dried.
Please note: For effect colours, e.g. magic green-purple first apply at least two matt black coats; after approx. 45 - 60 minutes’ drying time, spray on at least two coats of the effect colour.
Notes for RAL colours: first apply at least two transparent coats; drying time between coats: 45 - 60 minutes; after at least 3 hours drying time, spray on at least two coats of the RAL colour.
- Hardening: After 1 - 2 hours the Carbody Spray Film is dust-dry. After 24 hours the vehicle is ready to drive again.
For detailed information, check the instruction manual!
What can I spray with FOLIATEC.com CARBODY SPRAY FILM?
⇒ All smooth, non-absorbent and solvent resistant surfaces can be sprayed with FOLIATEC.com CARBODY SPRAY FILM.
Where should FOLIATEC.com CARBODY SPRAY FILM be used?
⇒ We recommend using the spray film in a spray booth or a suitable garage or workshop.
How many coats of FOLIATEC.com CARBODY SPRAY FILM should be applied?
⇒ At least four coats should be applied with the FOLIATEC SPRAY SYSTEM powered by WAGNER. The first coat should be sprayed on very finely; all further coats should be applied generously and uniformly.
Does the surface need to be sanded?
⇒ No. Sanding the surface would make the FOLIATEC.com CARBODY SPRAY FILM difficult to remove.
Is FOLIATEC.com CARBODY SPRAY FILM car wash-proof and would it withstand high pressure washing?
⇒ FOLIATEC.com CARBODY SPRAY FILM is suitable for textile car wash systems that do not use hard brush cleaning. For a longer lifespan, we recommend washing the car at a washing station using a high pressure washer (minimum distance 40cm) and foam lance.
How do I repair small damages to the FOLIATEC.com CARBODY SPRAY FILM?
⇒ Small damages can be simply dabbed away. The FOLIATEC.com CARBODY SPRAY FILM will bind with the old coat.
What can remove spray mist or light metallic residue?
⇒ Spray mist and residue can be rubbed away using FOLIATEC.com THINNER (item no. 20859) or silicone remover and a soft cloth.
Is the FOLIATEC.com SPRAY SYSTEM complicated to use?
⇒ No. No practice is necessary for using the FOLIATEC.com SPRAY SYSTEM. Anybody who follows the operating instructions (included) will achieve excellent results!
Ask our technician
If you have any further questions please have a look at the FAQs in our blog or ask our technician.
Tip: You can also find application images taken from other users in our blog.