Frame Defender Paint Protection Film Set, 31 pieces

Preview: Frame Defender Paint Protection Film Set, 31 pieces

Frame Defender Paint Protection Film Set, 31 pieces

FOLIATEC.com Frame Defender Paint Protection Film Set for protection against stone chips and scratches on the bike

€34.95

Content: 0.138 square meter (€253.26 * / 1 square meter)

Prices incl. VAT plus shipping costs

Weight 0.104 kg

Ready to ship today,
Delivery time appr. 1-3 workdays

Order number: 31940

Vorteile

Kostenloser Versand ab € 50,- Bestellwert
Versand innerhalb von 24h*
30 Tage Geld-Zurück-Garantie

The Frame Defender Paint Protection Film Set is a quick and easy way to protect the paint... more

Close menu

The Frame Defender Paint Protection Film Set is a quick and easy way to protect the paint from stone chips, scratches, wear and loss of value, helping to maintain the value of the bike. The 31-piece universal set of highly resistant Polyurethane material is easy to apply and easy to remove.

Universal-Set of 31 pieces, cut out, ready to use
available in crystal clear or matt
EXTREMELY ROBUST: The highly resistant polyurethane material is resistant to cold, heat, moisture, ice, salt and UV radiation. Even high-pressure cleaners are no problem for the strong protective film.
WORKS AS PAINT PROTECTION FILM: Protects the frame against stone chips, scratches, wear and maintains the value of the bike.
EASY MOUNTING: The self-adhesive film can be mounted easily and bubble-free by using a wet application method.
EASY TO REMOVE: Even after years of use the paint protection film leaves no residue during removal and therefore protects the paint.

Tip: We recommend leaving the foil on the paint for two years at the most. It should then be replaced!

Close menu

Application

Clean the surface on which the film is to be applied thoroughly from grease and dust residues. For cleaning use silicone remover, isopropyl alcohol or alcohol (no spirit or benzine). Dry the surface with a lint-free cotton cloth.
Remove backing paper.
Generously spray the surface and the adhesive side of the film with a mixture of water and a few drops of dishwashing detergent.
Place the film piece on the surface and position it.
Spray the surface of the film piece again, press it down and glue it outwards from the middle using a squeegee or lint-free cotton cloth. Use a cotton cloth to remove or vacuum up the removed liquid.