Exhaust Pipe 2C Gloss Spray Paint, black glossy, 250 ml
FOLIATEC.com Exhaust Pipe 2C Gloss Spray Paint is ideal for exhaust pipe and/or embellisher
Prices incl. VAT plus shipping costs
Ready to ship today,
Delivery time appr. 1-3 workdays
- Order number: 2125
- Kostenloser Versand ab € 50,- Bestellwert
- Versand innerhalb von 24h*
- 30 Tage Geld-Zurück-Garantie
You want to make sure your vehicle has a sportly look? Then Exhaust Pipe 2C Gloss Spray Paint is just what you need: sipmly spray on to leave your exhaust pipe and/or embellisher shining like new!
Our Exhaust Pipe 2C Gloss Spray Paint utilize an innovative 2C system: the hardening agent is already in the can which means you can say goodbye to inconvenient mixing!
- available in black glossy (looks like black chrome)
- heat resistant
- chemical, corrosion and oil resistant
- for exhaust pipe and/or embellisher
- for a modern sports car look
- Shake can well before use! Remove the red push button on from the cap directly before spraying.
- Turn the can 180° and attach the push button to the pin on the base of the can.
- With the ball of your hand, press the red release button as far as it will go. Re-shake can well after activaiting.
Note: After activating the hardener, the processing time of the can is 5 - 6 hours.
For further instructions read the application sheet!
- How should I prepare my exhaust pipe for the painting?
⇒ You simply have to treat the surface with a fine sandpaper and then remove oil, fat and silicones from your exhaust pipe. The exhaust pipe has to be dry and dust-free before the painting.
- Can I peel off the EXHAUST 2C SPRAY again?
⇒ No, it’s a permanent coating.
- How heat resistant is the lacquer?
⇒ The lacquer is heat resistant up to 180°C (continuous use) or 220°C (short term use).
- Can I go through a car wash with painted exhaust pipes?
⇒ Yes, there are no problems in car wash.
- How can I clean painted exhaust pipes?
⇒ You can use car shampoo. You can also treat the Exhaust 2C Spray with car polish.
Danger: Extremely flammable aerosol. Pressurised container: May burst if heated. Causes serious eye irritation. May cause an allergic skin reaction. May cause drowsiness or dizziness. If medical advice is needed, have product container or label at hand. Read label before use. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not pierce or burn, even after use. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F. Dispose of contents/container in accordance with local/regional/national/international regulations. Repeated exposure may cause skin dryness or cracking. Buildup of explosive mixtures possible without sufficient ventilation. Contains isocyanates. May produce an allergic reaction. Contains Hexamethylene diisocyanate, oligomers, acetone, n-Butyl acetate, 2-Methoxy-1-methylethyl acetate.
In den Testberichten als bestes Produkt beworben und hält auch tatsächlich,was versprochen wird.
Kostengünstige Alternative zum Kauf eines industriell lackierten Endproduktes.Leichte Verarbeitung und sauberes Ergebnis. Ich gehe davon aus,dass durch meine gute Vorarbeit die AMG Edelstahlfakeblenden jetzt in schwarz glänzend an meinem Fahrzeug ganz lange halten. Warum auch nicht,da die Blenden keinen Kontakt,zu den heißen Endtöpfen haben.