Apply paint protection film
Applying paint protection film to your car’s body is a great way to protect it from scratches, dirt, and other damage such as stone chips. To make application as easy as possible, we offer a wide range of ever-evolving paint protection films. Whether it's for bike racks, door handle recesses, or entry sills – there's a film for every problem area. For special needs, our universal paint protection film is also available and can be custom cut to fit your specific requirements. This means you can apply the film anywhere on your vehicle you like.
This tutorial video shows you exactly how to apply our paint protection films to your car and how to protect your vehicle with ease. In the video, we first explain how the film works and provide an overview of the application process. Then, we walk you through the preparation steps and show you how to install the film properly. Finally, we offer a detailed installation guide and test the product on a real car. By the end of this tutorial video, you’ll have all the information you need for safe and easy application!
To apply paint protection films to your vehicle, you should proceed carefully and precisely to achieve a high-quality result. Here are the steps to follow:
Preparation: Thoroughly clean the paint surface to remove dirt, dust, and grease. Use a mild cleaning agent and water. Make sure the surface is completely dry before proceeding to the next step.
Cutting the film: For smooth application, measure the area to be protected and cut the paint protection film according to the dimensions. You can use scissors or a sharp knife. Make sure you have enough film to cover the entire surface and leave a bit of extra around the edges for easy adjustment.
Moistening the surface: Spray a light mixture of water and mild cleaner onto the surface where the film will be applied. This allows some sliding ability and helps align the film during installation.
Applying the film: Carefully remove the protective backing from the paint protection film. Start at one corner and gently lay the film onto the surface. Use your fingers or a squeegee to smooth the film and press it down evenly. Work from the center outward to avoid wrinkles and bubbles.
Removing air bubbles: If air bubbles form under the film, you can gently push them to the edges using a squeegee or plastic scraper. Work slowly and evenly to ensure a smooth surface.
Finishing: Once the film is applied smoothly and without wrinkles, let it dry for several hours. Check the edges and corners to ensure proper adhesion and that there are no loose areas.
It’s important to note that applying paint protection film requires precision and may take a bit of practice. If you’re unsure, consider hiring a professional installer to ensure a flawless result.
Curious? Order your paint protection film today and enjoy free shipping within Germany on orders over EUR 29.95!
Content: 0.05 Quadratmeter (€399.00* / 1 Quadratmeter)
Content: 0.087 Quadratmeter (€114.37* / 1 Quadratmeter)
Content: 0.11 Quadratmeter (€181.36* / 1 Quadratmeter)
Content: 0.05 Quadratmeter (€259.00* / 1 Quadratmeter)
Content: 0.29 Quadratmeter (€89.48* / 1 Quadratmeter)
Content: 0.5 Quadratmeter (€69.90* / 1 Quadratmeter)