€99.95
Available, delivery time: 1-3 days
Product information "Hard Rock Liner Basecoat, 2,5 liters"
The Basecoat acts as the Primer of our Hard Rock Liner. It was developed to make the Hard Rock Liner removable again.
- ready to spray
- can be overpainted with the FOLIATEC.com Hard Rock Liner, 2C textured paint
- easy to remove
Application
- Dismantle all car parts that can be easily removed. Mask all surfaces that are not to be coated. Mask rubber seals with FOLIATEC.com Easy Up Tape (item no. 79920). You should also protect wheel housings and the car underbody from spray mist.
- Clean and dry the surface to be sprayed, including edges, then degrease using FOLIATEC.com Carbody Spray Film pre-cleaner (item no. 79934). After cleaning, remove the remaining dust with a duster.
- Applying the basecoat with the FOLIATEC.com DIY Spray System:
Apply the basecoat in 2 generous layers. Work at a medium pace at level 2 and set the quantity control on the spray pistol grip to level III or IIII. - Application with the spray gun:
Apply the basecoat in 2 generous layers at a medium pace. Use a 2.0mm spray nozzle with 2 - 3 bar pressure in a suitable spray booth. - Flash off for 90 minutes after the first spray coating.
Note: It can be coated with Hard Rock Liner once completely dry (after 4 - 5 hours at 20°C depending upon the thickness of the layers).
For detailed information, check the instruction manual!
Frequently asked
- How sensitive is the Hard Rock Liner to dirt?
-
⇒ Due to the extremely hard and robust surface, the Hard Rock Liner can be cleaned easily despite the structure.
- How should the Hard Rock Liner be cleaned?
-
⇒ Vehicles coated with Hard Rock Liner can be easily cleaned in a textile car wash or with a soft brush and car shampoo.
- Can the Hard Rock Liner be overpainted?
-
⇒ No, overpainting is not possible.
- How long do I have to wait until I can drive my vehicle again?
-
⇒ The Hard Rock Liner is dried after 24 hours so that the vehicle can be moved again. It reaches its full final hardness after 6 - 7 days.
- Do I have to pre-treat or sand the varnish?
-
⇒ With the removable version, the paint has to be dry, dust-free and degreased. With the permanent solution one can improve the adhesion by means of a 400 abrasive paper.
Do you have any questions? You can reach us via our contact form, via WhatsApp +49 (0)152/591515 or via e-mail: support(at)foliatec.de
Hazard Note
Contains 1,2-benzisothiazol-3(2H)-one. May produce an allergic reaction.
Similar Items
Our new developed Hard Rock Liner lends a new dimension to car styling and provides a real Wow! effect: The rough and coarse look isn’t just a real eye-catcher but also offers tremendously protection against damages and influences from outside. to spray on aggressive look extremely robust, scratchproof, highly chemical and temperature resistant removable - in combination with the FOLIATEC.com Hard Rock Liner Basecoat The set includes: 2 liters HARD ROCK LINER, 2C TEXTURED PAINT 0,5 liter HARDENER FOR 2C TEXTURED PAINT Product tip: Best to be used together with our special FOLIATEC.com Hard Rock Liner Basecoat so the Hard Rock Liner can be removed easily.