€49.95
No longer available
Product information "COCKPIT designfilm Panther Wrap, black running meter"
Give your car’s interior a high-end OEM finish: The Panther Wrap Velours-style film in wide-format linear meter offers a refined suede-look texture and an impressive 140 cm width – perfect for headliners, door panels, trunk linings, and other large-scale interior applications.
This flexible, self-adhesive premium film is easy to cut and apply bubble-free – ideal for tuning enthusiasts, professional car stylers, and ambitious DIY projects. Each unit includes 1 meter (100 cm length × 140 cm width) – multiple units will be delivered in one continuous piece when possible. A precision cutter and detailed installation guide are included in the package.
Product Details:
-
Dimensions per unit: 100 cm length × 140 cm width (sold by the meter)
-
Color & Texture: Black, Velours-look (matte suede surface)
-
Material: Self-adhesive, stretchable vinyl film with soft-touch finish
-
Applications: Headliners, door panels, trunk linings, large interior trims, flat surfaces
-
Removable without residue – perfect for leased or temporarily styled vehicles
Scope of Delivery:
-
1x Panther Wrap Velours-style film (1 linear meter – 140 cm wide)
-
1x Precision cutter knife
-
1x Step-by-step installation manual
(Multiple meters will be delivered as a continuous roll when possible)
Key Benefits:
-
Premium OEM-style Velours/Suede look – visibly and tactilely upscale
-
Extra-wide format (140 cm) – ideal for large surfaces with minimal seams
-
Bubble-free application – beginner-friendly
-
Durable and flexible – no fraying, no warping
-
Adheres to nearly all smooth interior surfaces
| Panther Wrap: | schwarz, 140cm x lfm |
|---|
Application
Preparation: We recommend carrying out the work in a clean environment at a room temperature between 15 and 25 degrees Celsius. The application must be carried out on a smooth, clean, grease-free and dry surface. For pre-cleaning, we recommend our pre-cleaner, article number 79934.
➊ For open-pored surfaces or overhead bonding, such as on the headliner, we recommend using our spray adhesive, article number 2480. This is suitable for permanently flexible bonding. Spray the substrate in one or two thin coats and allow to flash off for approx. 10 to 15 minutes.
➋ Cut to size: Now place the part to be covered on the FOLIATEC.com Panther Wrap film and cut to size. An allowance of 3 to 5 centimeters is necessary all around. Depending on the shape of the component (strong curvature), more allowance may be necessary. The protective film remains on the adhesive side during this step.
➌ Remove the protective film: For large-area work, we recommend working in pairs. Once the protective film has been removed from the adhesive side, the soft material is very flexible and adheres strongly. Make sure that the adhesive side does not touch itself.
➍ Stick it on: Carefully apply the FOLIATEC.com Panther Wrap film to the part to be bonded, pulling lightly. Small creases can be smoothed out with your fingers. The film can also be easily repositioned. Three-dimensional bonding is possible due to the stretchability of the film. At edges, we recommend folding the film over and pressing it down.
➎ Cut off the excess: After gluing, the excess material must be cut off. Use the enclosed cutter knife for this. The cutter knife can be shortened several times so that a sharp blade is always available. After approx. 30 minutes, we recommend pressing all edges and surfaces again.
Frequently asked
Do you have any questions? You can reach us via our contact form, via WhatsApp +49 (0)152/591515 or via e-mail: support(at)foliatec.de