SECURLUX PASSENGER PROTECTION SYSTEM

BASIC PROBLEM

Unprotected windows in the front of your car bear a whole series of problems for you and your passengers.

Using FOLIATEC® Automotive Window Films you are able to reduce those risks considerably Installed on the rear windows of your car, FOLIATEC® AutoglassFilms have been offering UV-, break-in- and shattered glass protection for you and your passengers for years. The Installation of Automotive Window Films on front windows however is strictly regulated by law, specified by ECE regulation 43.

THE SOLUTION VIA FOLIATEC®

FOLIATEC® has developed the solution for securing the front side windows of your car – in accordance with ECE Regulation 43 – in order to provide better protection against UV-rays, break-ins and shattered glass: SECURLUX® PASSENGER PROTECTION SYSTEM:

FOLIATEC® proudly presents the first mobile luminous transmission tester certified by both the German „Materialprüfungsamt“ and „Kraftfahrt-Bundesamt“. Therewith it is possible to legally allow the installation of Automotive Window Films on the front side windows of your car. By retroactively installing such films on the front side windows, the legally regulated minimal luminous transmission can fall short. Up to now there have not been any legally certified mobile devices to officially prove the allowability of an installed Automotiv Window Film on already tinted windows, due to strictly regulated measuring tolerances. Thus the installation of Automotive Window Films on the front side windows has been forbidden.
Click for further information on...

...measuring divice TLG 43A
...luminous transmission testing with TLG 43A
...the approval by MPA and KBA
...physical and technical basics

The second component of SECURLUX® PASSENGER PROTECTION SYSTEM consists of the distinctly reliable SECURLUX® Protection Film. Being a high-quality Automotive Window Protection Film, SECURLUX® by FOLIATEC® provides a significant advantage concerning the safety of the passengers inside any type of vehicle. Being constructed in a specific way, SECURLUX® reduces the danger of injuries caused by fragments of shattered glass, prevents break-ins and is able to filter 99% of the occurring UV-rays.

more...

service_zulassung1 service_zulassung7 service_zulassung8 service_zulassung9

APPLICATION

1. Measurement
Most side windows are already produced with a tinted effect. For securing the legally regulatet minimum luminous transmission of 70% for front side windows as well as advising against an installation of window films in that case, the luminous transmission of your front side windows will be checked with FOLIATEC® TLG 43A before the installation of the SECURLUX® Protective Film.

2. Installation
The suitability of your front side windows for the SECURLUX® Protective Film having been proven, you can choose between a professional installation by an authorised FOLIATEC® STYLINGTEAM Partner or self-installation with one of our do-it-yourself packages.

3. Test
Afterwards an officially certified expert will test the luminous transmission of your front side windows including the SECURLUX® Protective Film via FOLIATEC® TLG 43A.

4. Allowance
An officially certified expert will grant permission by controlling the measurement report and enlisting the test in your vehicle documents, in accordance with the general design certification of SECURLUX® Protective Film.