1) Remove the standard spray caps.
2) Put the washer nozzles into the existing holes as shown in the illustration
3) Tighten the screw on the underside of the bonnet by hand.
4) Push on the length of tube provided and connect it with the standard washer fluid supply pipe. It will be easier to attach the tube if it is first heated in water with a temperature of approx. 40°C (adding soap liquid if necessary).
5) Adjust the position of the spray nozzles using the spanner provided so that the spray wets the entire windscreen.
Please note: The tube should not be bent or damaged by chafing. Check that the washer nozzles and the connecting tubes are firmly in place before you drive off and at regular intervals thereafter. Please ensure that the washer nozzles used do not interfere with any other parts under the bonnet and that no tools or other materials are left under the bonnet after the installation work has been completed.
