Fachhändler
Professionelle Montagepartner
Anwendungsbereiche
Produkte
Produktvorteile und Funktionen
schliessen

LOGIN
 

SPLASH-LightsMA-DOWNLOAD

 SPLASH_Light

Caution: Make sure to disconnect the vehicle battery prior to installation!

1) Open the engine hood and pull off the water supply hose from the original washer nozzles. Remove the washer nozzles according to the operation manual of the manufacturer or contact your local authorized dealership.
2) Pull the cable of the SPLASH-lights through the holes from the top.
3) Fasten the SPLASH-lights according to the mounting diagram and connect the water supply hose.
4) If necessary use the enclosed extension instead of the nut. In this case, wrap the enclosed Teflon tape around the screw head to avoid leakage.
5) Test the washer system for proper function and adjust the washer nozzle so that the water spray directly hits the windshield. To avoid scratches on the windshield, please conduct the test with the wiper arms folded upward away from the windshield. The washer nozzles can be adjusted with a fine needle.
6) For SPLASH-lights with stroboscopeflashes:
Connect all colored cables of the SPLASH-lights with the corresponding color of the controller cable.
7) Connect the cables according to the wiring diagram.

Washer nozzles with blue LEDs
Rated voltage: 12 V DC
Rated current: 20-22mA

Washer nozzles with ColorChange
Rated voltage: 12 V DC
Rated current: <60mA

Washer nozzles with Strobe-lights
Rated voltage: 12 V DC
Rated current: <600mA

Avoid contact with activated lamps with hands or other parts of the body. Have the installation checked by a qualified automotive shop to avoid cable fires, short circuits etc. Intended use only for exhibition and show purposes. Do not use in street traffic! For areas outside of the Federal Republic of Germany: Please take the country specific registration requirements into consideration.
The manufacturer does not assume responsibilities for damages caused or are the result of wrong, inattentive and / or improper application. Warranty claims for reverse pole connection, improper installation, manipulation of components etc. will not be honored.

Caution: Do not install at eye level! Avoid looking into the flashing light. Danger of eye injury!