Please read the instruction manual carefully before usage.
Clean the inside and outside of the windscreen to ensure it is thoroughly clean and free from grease.
1) Spray the outside of the windscreen with water (add 1-2 drops of washing liquide) and place the foil at the two top outer edges (A posts) of the windscreen. The foil adheres to the glass automatically (The film can be positioned easily when wet due to sliding capability). Ensure that at its deepest the foil reaches a maximum height of about 11 cm on the glass. 2) Cut off excess foil along the top and sides of the windscreen. 3) Remove the transparent protective foil from the tinted foil by sticking 2 adhesive strips on the inside and outside of one edge of the foil and pulling them apart. Spray the adhesive side of the foil and the inside of the windscreen with water. 4) Remove the wet foil from the outside of the windscreen and apply to the inside. 5) Spray water again on the side of the foil facing you and squeeze the water between the foil and the glass from the centre to the sides. Cut off excess at edges with a knife.
