Please read the instruction manual carefully before usage.
1) Select a suitable position on the side or at the rear of the vehicle for the placement of the POWER-FUEL tank nozzle (not on the roof or the hood of the vehicle). Note: Make sure that the dummy is only glued onto a completely level surface so that it adheres to the entire area!
2) Cleaning: Thoroughly clean the application surface and the bottom side of the tank nozzle dummy, removing any dust, dirt, polish and grease residue with a soft cloth (use silicon remover if necessary).
3) Remove the protective foil from one side of the adhesive pads.
4) Position the adhesive pad on the POWER-FUEL tank nozzle and firmly press it onto the adhesive side of the pad.
5) Now pull off the protective foil from the desired decoration stickers and glue them to the indentations provided on the tank nozzle dummy.
6) Check the positioning of the tank nozzle dummy.
7) Subsequently remove the second protective foil of the adhesive pad and position the tank nozzle dummy on your vehicle in the desired position. Firmly press the tank nozzle dummy over the entire surface.
Check the secure fit of the POWER-FUEL tank nozzle dummy at regular intervals.
Please note the conditions of registration approval for areas outside the Federal Republic of Germany.
