|
|
|
|
 |
 |
 |
| |
|
|
|
|
|
Please read the instruction manual carefully before usage.
Assembly wiring diagram/NEON-InsideSpots Medium and Large
Connect the black/white wire to 12 V positive pole
Connect the black wire to the negative pole
Be sure to observe the proper polarity, otherwise the light could be damaged. Protect the circuit with an in-line fuse.
Installation
Affix to desired place by means of the adhesive pads enclosed
Please note: The NEON-INSIDE lights, do not have a waterproof housing and may only be installed in the water-protected, non-visble areas of the interior. The transformer may become hot in case of longer periods in use. Make absolutely sure of sufficient ventilation!
Caution: Do not install the product on the exterior of the vehicle or in an area visible from outside. This method is not keeping with certain safety standards. For fitment in countries outside the Federal Republic of Germany, the national homologation regulations apply. Do not install close to the radio or heating equipment. The function of other electronic equipment could possibly be affected, e.g. Anti-Lock Braking System etc.
NEON-INSIDE Spots is only for 12 V DC. In order to prevent cable fires, short circuits, etc. use the suitable intermediate fuse, and let the installation be checked by a reliable car repair shop. Install in a protected place to avoid damages to the NEON-INSIDE Spots by passengers getting in and out of the vehicle. Periodically check to be sure that the electrical connections are sound and the Stick is firmly mounted.
Warning: Before getting started, disconnect the battery cables to prevent electrical shock and injury during installation. The transformer has a high output voltage.
Input voltage: 12 V DC. Output voltage: 800 V AC, 500 mA
Do not touch NEON-INSIDE Spots with hands or body parts when it is turned on.
Warning: The function of the tubes can be affected or the tubes damaged by excessive vibration. Application only for exhibition and show purposes. Not for use in road traffic! No guarantee for mistakes concerning the poles, improper installation, manipulation of elements, etc.
|
|
|
|
 |
 |
 |
|
|
|
