Please read the instruction manual carefully before usage.
Assembly wiring diagram
- Connect the red wire to 12 V DC positive pole
- Connect the black wire to the negative pole
Be sure to observe the proper polarity, otherwise the light could be damaged. Protect the circuit with an in-line fuse.
Installation
A) direct srew on
B) slip metal bracket over edge of trunk cover
Caution
Do not install the product on the exterior of the vehicle or where it can impede the vision of the driver. This application is not permitted under the Motor Vehicle Safety Standards. Consult your local motor vehicle registration ordinances. Do not install in the immediate vicinity of the car radio or the heating ducts. Other electronic devices, such as the ABS system, navigation devices etc. may be impeded in their function. Use a connection with a safety fuse such as the cigarette lighter to avoid cable fires, short circuits, etc. and have the installation checked by a qualified auto shop. The warranty is renderd null and void in instances of reverse pole connection, improper installation, manipulation of modular units, etc.
Caution: Do not touch the activated lamp nor come into contact with other parts of the body. Do not look directly into the lamp! The transformer has a high output voltage.
Note: Strong vibration can impede or damage the lamp function. Use only for exhibition and show purposes. Do not use in street traffic.
Ratet voltage: 12 V DC
Ratet current: 380 mA
1,92 W
