|
|
|
|
 |
 |
 |
| |
|
|
|
Please read the instruction manual carefully before usage.
1) Thoroughly clean the surface to be glued (free of dirt and grease) with glass cleaner. Take care that no fingerprints remain on the glass.
2) Spray the mirror with water (this makes it easier to position the Tattoo).
3) Remove the white protective foil from the adhesive side of the Tattoo (be careful not to leave fingerprints on the adhesive surface) and position the Tattoo on the moistened mirror.
4) Correctly position the Tattoo as needed and brush the water out from under the Tattoo (e.g. use a credit card wrapped in a soft cloth).
5) Do not clean the mirror until after 3 days. Use only water and commercially available liquid detergent. The drying time can be reduced with the use of a hair dryer – Caution: take care not to singe the Tattoo.
Note: Apply at a temperature of at least 15°C (60°F).
|
|
|
|
 |
 |
 |
|
|
|
