FULLSPEED WindscreenWiper

Please read the instruction manual carefully before usage.

1 = straight wiper arm (fitting both models)
2 = curved wiper arm (9 mm) (fitting some Ford, Audi, Mercedes, Porsche, VW models)
3 = curved wiper arm (4x9 mm) (fitting some Ford, Audi, Mercedes, Porsche, VW models)

1) Compare the length of the original wiper blade with that of the FULLSPEED wiper blade (replace only if same length).
2) Remove the original windscreen wiper (see vehicle owner\'s manual). Please ensure that the fastening clips on the mounting adapter are not damaged, as they may have to be re-used.
3) Use an appropriate adapter (possibly the original adapter) and attach the FULLSPEED windscreen wiper (see assembly diagrams).
4) Check the functionality of the windscreen wiper on the wet windscreen (no contact with windscreen frame).
5) Check that the FULLSPEED windscreen wiper is securely in place before you drive off and at regular intervals thereafter.

Please note: This windscreen wiper does not require approval by the German vehicle inspection agency on condition that the length of the FULLSPEED windscreen wiper is identical to that of the original windscreen wiper. When in use the wiper blades must not touch the windscreen frame. They must be securely attached. For countries other than the Federal Republic of Germany, please observe your country's specific road vehicle registration regulations.