Please read the instruction manual carefully before usage.
The FULLSPEED Window Wipe Spoiler can be fitted to original front windshield wiper arms without pre-existing spoiler system.
Necessary tools:
Phillips screwdriver, small and medium size, edge cutter
1) Position the spoiler to fit on the windshield wiper arm prior to mounting.
a. Unscrew the upper part of the spoiler from the lower part and detach the two fastening plates from the bottom.
b. If desired, take this opportunity to paint the two parts in the chosen color (tip: paint the upper and lower part in different colors) and allow the paint to dry completely before mounting.
2) Screw the lower part onto the original wiper arm, i.e. the wiper arm runs along the bottom of the lower part of the spoiler and is clamped in place by screwing the fastening plates together.
3) After the desired positioning of the lower part, shorten the excess length of the screw thread.
4) Screw the upper part onto the lower part.
Please check the tight and correct fit of the Window Wipe Spoiler prior to driving and at regular intervals.
