Please read the instruction manual carefully before usage.
1. Thoroughly clean grease, dirt and silicon residue from the mirror enclosure and the underside of the FULLSPEED outside mirror spoiler (use silicon remover if necessary).
2. Position the spoiler with the small end outward on the edge of the mirror and carefully bend it around the mirror so that the spoiler has a tight and secure fit.
3. Fix the adhesive pad to the spoiler and press it firmly in place.
4. Remove the second protective foil from the adhesive pad and firmly press the spoiler onto the outside mirror.
5. Place the enclosed rubber weatherstrip around the outer edges of the spoiler.
Note: Check the FULLSPEED outside mirror spoiler for a tight and secure fit prior to operating the motor vehicle and at regular intervals. Fold in exterior mirror(s) before entering the car wash.
