1) Cut the DESIGN Stripes to the desired length.
2) Ensure that the application area is free from grease and dirt, using silicone removing spirit.
3) Remove adhesive film.
4) Apply DESIGN Stripes and press on using a cotton cloth.
Warning: When applied outside, the Deco Stripes may fade after approx. one year due to strong UV exposure. The degree and time of fading depends on the amount of sun exposure. The adhesiveness of unused stripes may decrease after one year.
We recommend that you leave the film on the paint for a maximum of two years. After this it should be replaced !
Note: allow to dry for approx. 1 hour after application. Do not wash vehicle in a car wash for three days after. The film should not be applied to "fresh” paint, as the paint is only hard enough after approx. 2 months.
