Pack contents: 2x LED Cubes (3 mm LED, light colour: blue) with cigarette lighter connector.
Cigarette lighter connector with on/off switch and integrated micro fuse (500 mA)Before assembly read the instruction through completely - take your time when assembling the CUBE Crystal Lights.
If you have any queries regarding assembly, please contact the technical support department: techsupport@foliatec.de
Tel: +49/(0)911/97544-120
No warranty claims from incorrect assembly, polar reversal or tampering with components etc. Assemble in a sheltered area to avoid damage from external influences. Please ensure that cables are not squashed or bent and that they are protected from wear and tear. Note:
Outside the Federal Republic of Germany the national regulations apply. Decorative lighting is not permitted!
Application:
1) Choose where you want to attach the LED Cubes. 2) In doing so, ensure that the driver's view is not impaired. 3) Insert the connector into the 12V cigarette lighter socket. 4) At the head of the cigarette lighter connector you will find the ONOFF switch.
This connector is protected by a replaceable 500 mA micro fuse. In the event of a defect, unscrew the tip of the 12V cigarette lighter connector and replace the micro fuse. Always replace the fuse with one of the same value.
Technical data:
Rated voltage: : 12 V
Rated current: 15mA
LED-diameter: 3mm,
Micro fuse: 500mA (cigarette lighter socket)
Length of connection cable: 207 cm
