|
|
|
|
 |
 |
 |
| |
|
|
|
Please read the instruction manual carefully before usage.
Type 1-4)
1) Thoroughly clean the application surface area on your vehicle with spirit or silicone remover so that it is free of dust and grease.
2) Check the position of the ALU grill screen.
Type 1)
3 a) Remove the protective film layer from the adhesive surface of the plastic hood and stick it in the required position.
4 a) Put the grill on the plastic hood.
5 a) Remove the protective film layer from the adhesive surface of the frame and glue it on the ALU grill screen.
6 a) Pull the clear protective film layer off the frame.
Type 2-4)
3 b) Remove the protective film layer from the adhesive surface of the black foil and stick it in the required position.
4 b) Remove the protective film layer from the adhesive mounting surface of the grill screen and stick it on the already positioned black foil.
Note: If you wish to paint the frame of the grill screens type 2-4, then you should do so prior to application!
|
|
|
|
 |
 |
 |
|
|
|
