... Easy installation

The ideal suited film set gets delivered with a detailled mounting instruction.
You just need a little time and a water sprayer.

Step 1
Cleaning

Step 2
Glue On

Step 3
Squeeze Out

Step 4
Ready

Finished!

Now you have a protected painting, that will not get damaged by crushed stones, insects, environmental influences, etc..
The perfect optics and the good resale value of your vehicle will obtain for years.
Does the set is made up of several pieces (tank, etc..), these pre-cut parts are getting mounted in the same method of operation.

A detailled mounting instruction with useful tips is included to each film set.
Please read this very carefully before you start with the installation!

Removal

bike-demontage
If you want to remove the film, please note the following:

Detachable without any residues by warming up the film with around 60°C (for example with a hair dryer)

Removal without any lacquer damages is only guaranteed, if the original lacquer load capacity of the vehicle maintains.

There is no warranty when the film was installed on fresh painted parts (for example after a repair damage).